Eco-Light Indoor Farming Solutions
Our LED Grow Lights Options:
Our LED Grow Lights are available in various options, from tubes to bulbs, so as to provide flexible solutions to suit various home styles and indoor garden sizes.
Horticulture Tubes & Bulbs
Horticulture T8 – EASY Series Tube
This series of horticulture lamp uses the standard T8 fixture with built-in driver and very easy to set up.
The tube is a combination of white, warm white cost effective branded LEDs and providing a balance of the various colour spectrum that is essential to plant growth.
This fixture is designed for close proximity lighting system.
An easy, affordable and efficient way to start your own indoor plant system.
- Easy to set up
- Standard T8, 2 feet
- Single Ended Input
- Lightweight
- High Power Efficiency
Specifications
- Input : 200 to 250VAC, 50Hz
- Power : 10W (typical)
- PF : Above 90%
- Viewing Angle : 120o
- PPFD (30cm) : 38umol/m2s(typical)
- Red/Blue Ratio : 4.5 (typical)
Horticulture T8 – SOLA Series Tube
The SOLA series uses the standard T8 fixture with built-in driver and heatsink. This tube is a combination of high efficacy White, 660nm Red and 440nm Blue LEDs.
The LED combination for this series enhances the blue and red portions of the light spectrum, while maintaining a sufficient level of green/amber wave lengths to make the light more pleasing to the eye. Certain plants also react to the green spectrum to enhance their growth.
This is suitable for the advanced farmer who would like to experiment with a variety of crops.
- Easy to set up
- Standard T8, 2 feet
- Built-in Heatsink
- Typical Power of 12W
- Single Ended Input
- High Power Efficiency
Specifications
- Input : 200 to 250VAC, 50Hz
- Power : 12W (typical)
- PF : Above 90%
- Viewing Angle : 120o
- PPFD (30cm) : 58umol/m2s(typical)
- Red/Blue Ratio : 2.8 (typical)
Horticulture PAR38 – PAR Series Lamp (Discontinued)
The PAR series uses the standard PAR38 fixture with built-in driver and heatsink.
The lamp is a combination of high efficacy White, 660nm Red Power LEDs.
This model uses PMMA optics to produce a narrow viewing angle and suitable for smaller area and higher concentration of light energy.
This series is suitable if you need to place the lamp at a further distance.
- Easy to mount using E27 socket
- Standard PAR38 Fixture
- Efficient Heatsink
- Typical Power of 18W
- High Power Efficiency
Specifications
- Input : 200 to 250VAC, 50Hz
- Power : 18W (typical)
- PF : Above 90%
- Viewing Angle : 60o
- PPFD (30cm) : 280umol/m2s(typical)
- Red/Blue Ratio : 3.5 (typical)